WIS industrial Seaming


Products by Machine



The Yarnpicker is designed to assist in the fabric preparation prior to the seaming process.

Warp yarns are automatically removed from the fabric resulting an undamaged set of original weft yarns to be used in the seaming machine.

The frame work of approximately 2 m² x 2 m high allows easy accessability to machine components.

The Yarnpicker YP3 is designed that the yarns in the actual picking area are not used in the seam strip.

This assures that no damaged yarns are left in the seam strip.

An electronic program (PLC) controls the complete automatic yarnpicking process.

The working speed is adjustable for different fabric requirements and the machine automatically stops if the working cycle is interrupted.

All adjustments of the machine are reproducible and the data per individual fabric can be stored on a flash drive for further use.

The seam strip is rolled up with a sheet of paper inbetween the layers of the weft yarns. This avoids damage of the yarns and caters for easy storage.

Field of Application

For single, double and triple layer design fabrics.

Machine capacity

Seam strip preparation time: 30-40 min
Set up time on the machine: 15 min
Max. width of the seam strip: 210 mm
Max. picking rate:   20.000 picks per hour

On selected fabrics double picking of threads is possible resulting in twice the amount of threads being picked (maximum 40.000).

Machine dimensions

Width: 0,90 m
Height: 1,80 m
Length: 1,60 m


Length: 1.60 m (63 inches)
Width: 0.90 m (35 inches)
Height: 1.80 m (71 inches)


20.000,- yarns per hour

On selcted fabrics double picking of threads is possible esulting in twice the amount of threads being picked (max. 40.000)